| Mon, 17 Apr 2017 23:58:21 -0700 |
Michael Pavone |
Fix time 68K is locked out of bus when doing a 128KB VRAM mode DMA transfer. Fixes a number of problems in Overdrive 2
|
| Mon, 17 Apr 2017 20:54:33 -0700 |
Michael Pavone |
SAT table register bit 0 is not used in H40 mode. Fixes corrupt sprites in ship crash landing scene in Overdrive 2
|
| Sun, 16 Apr 2017 18:43:34 -0700 |
Michael Pavone |
Fix some edge cases with regards to 128KB VRAM mode and the SAT cache
|
| Sun, 16 Apr 2017 16:40:04 -0700 |
Michael Pavone |
Initial work on handling the 128KB VRAM mode bit and some basic prep work for VDP test register support
|
| Sun, 16 Apr 2017 16:38:56 -0700 |
Michael Pavone |
Force display on in stateview if given a save state with the display off
|
| Sat, 15 Apr 2017 21:45:19 -0700 |
Michael Pavone |
Fix copy pasta error in handling of Z80 VDP port reads. HV counter reads are not illegal writes =P. Fixes immediate exit in Overdrive II, though other problems remain
|
| Wed, 05 Apr 2017 09:48:49 -0700 |
Michael Pavone |
Fix minor bug that displayed window plane as if it were plane A In plane debug view
|
| Tue, 04 Apr 2017 19:31:14 -0700 |
Michael Pavone |
Allow a .l suffix to a memory print command to allow fetching and printing a longword
|
| Mon, 03 Apr 2017 20:48:13 -0700 |
Michael Pavone |
Improved printing of word at absolute address to support reading from all address types. Implemented support for printing the value pointed to by a register. Removed abuse of read_dma_value in internal debugger.
|
| Fri, 31 Mar 2017 19:11:04 -0700 |
Michael Pavone |
Allow adding .w or .b to select just the low word or byte of a register in a 68K debugger print command
|
| Fri, 31 Mar 2017 19:07:04 -0700 |
Michael Pavone |
Allow printing current frame number in 68K debugger
|
| Fri, 31 Mar 2017 09:49:02 -0700 |
Michael Pavone |
Fix accidental fallthrough on com debugger command
|
| Thu, 30 Mar 2017 23:59:57 -0700 |
Michael Pavone |
YM2612 should also be reset on system soft reset
|
| Thu, 30 Mar 2017 23:57:30 -0700 |
Michael Pavone |
Reset YM2612 whenver the Z80 is reset. Fixes issue with stuck notes in Fantastic Dizzy and Kid Chameleon
|
| Wed, 29 Mar 2017 22:31:37 -0700 |
Michael Pavone |
Added Might and Magic III prototype to ROM DB as it requires SRAM, but does not indicate it in the standard header
|
| Wed, 29 Mar 2017 09:29:38 -0700 |
Michael Pavone |
Update ROM DB to override region for Japanese version of Atomic Robo-Kid (incorrect header) and to support some more unlicensed Chinese games with fixed value registers as documented by Andlabs on the Sega Retro wiki
|
| Wed, 29 Mar 2017 00:29:44 -0700 |
Michael Pavone |
Allow games to be specified in ROM DB via sha1 instead of product ID. Added a new ROM DB memory map device type fixed for emulating simple fixed value copy protection registers. Used those two features to support Ya Se Chuan Shuo via a ROM DB entry.
|
| Tue, 28 Mar 2017 09:39:54 -0700 |
Michael Pavone |
Fix exit trace mode edge case. Call do_sync if trace mode bit is changed in eori sr
|
| Tue, 28 Mar 2017 00:13:35 -0700 |
Michael Pavone |
Implemented M68K trace mode. Some edge cases/SR update paths still need work
|
| Mon, 27 Mar 2017 09:45:40 -0700 |
Michael Pavone |
Add Japanese version of SSF2 to ROM database
|
| Mon, 27 Mar 2017 00:40:10 -0700 |
Michael Pavone |
Initial implementation of YM2612 SSG-EG mode
|
| Sat, 25 Mar 2017 15:41:52 -0700 |
Michael Pavone |
Basic implementation of CSM mode that should handle documented edge cases. Dodesn't handle the weird undocumented edge cases I don't have a good understanding of yet though
|
| Sat, 25 Mar 2017 11:31:43 -0700 |
Michael Pavone |
Fix latching of V32 mode bit
|
| Sat, 25 Mar 2017 00:21:32 -0700 |
Michael Pavone |
Prevent blowing past our native translated instruction size of 255 bytes when translating movem with a large register list. Fixes bug in which Fantastic Dizzy was completely broken on 32-bit builds
|
| Wed, 22 Mar 2017 22:16:39 -0700 |
Michael Pavone |
Fix SBCD edge cases to pass Flamewing's test ROM. Could use some cleanup to produce better code for the SBCD case, but produces correct results now
|
| Tue, 21 Mar 2017 21:59:05 -0700 |
Michael Pavone |
Change the default screenshot path as per ticket:14
|
| Tue, 21 Mar 2017 21:40:47 -0700 |
Michael Pavone |
Make save directory configurable. Satisfies ticket:4
|
| Tue, 21 Mar 2017 19:56:50 -0700 |
Michael Pavone |
Allow variables in screenshot_path like initial_path
|
| Tue, 21 Mar 2017 19:48:08 -0700 |
Michael Pavone |
Don't leak a ternary tree when building the menu's initial path
|
| Tue, 21 Mar 2017 00:40:25 -0700 |
Michael Pavone |
Allow initial_path to contain variable references which allows the default value to be actually specified in the default config file
|
