| Sat, 08 Jun 2013 12:59:23 -0700 |
Mike Pavone |
Check memory results in ztestgen
|
| Sat, 08 Jun 2013 11:31:52 -0700 |
Mike Pavone |
Use a call instruction to figure out the original native address when retranslating so that it does not get lost when the byte transforms from a instruction word to extension word
|
| Thu, 06 Jun 2013 08:45:54 -0700 |
Mike Pavone |
Removed out of date TODO
|
| Thu, 06 Jun 2013 08:19:25 -0700 |
Mike Pavone |
Fix LDD and LDDR
|
| Wed, 05 Jun 2013 22:55:23 -0700 |
Mike Pavone |
Fix dec and inc when the operand is in memory
|
| Wed, 05 Jun 2013 19:26:02 -0700 |
Mike Pavone |
Fix channel mapping in key on/off register
|
| Wed, 05 Jun 2013 18:47:39 -0700 |
Mike Pavone |
Fix LDI
|
| Tue, 04 Jun 2013 22:30:49 -0700 |
Mike Pavone |
Fix set/res when the operand is in memory
|
| Tue, 04 Jun 2013 21:23:12 -0700 |
Mike Pavone |
Initial implementation of channel 3 special mode
|
| Tue, 04 Jun 2013 09:16:41 -0700 |
Mike Pavone |
Fix operator precedence bug with sustain level
|
| Mon, 03 Jun 2013 23:44:11 -0700 |
Mike Pavone |
Fix modulation shift value
|
| Mon, 03 Jun 2013 21:43:38 -0700 |
Mike Pavone |
Make the PSG and YM2612 use the master clock internal with an increment based on clock divider so that they stay perflectly in sync. Run both the PSG and YM2612 whenver one of them needs to be run.
|
| Sun, 02 Jun 2013 22:37:48 -0700 |
Mike Pavone |
Make shift value of operator output to modulation input a define
|
| Sun, 02 Jun 2013 22:33:27 -0700 |
Mike Pavone |
Adjust shift for feedback
|
| Sun, 02 Jun 2013 22:30:41 -0700 |
Mike Pavone |
Initial stab at feedback
|
| Sun, 02 Jun 2013 21:52:42 -0700 |
Mike Pavone |
Fix key scaling
|
| Sun, 02 Jun 2013 21:38:18 -0700 |
Mike Pavone |
Clear IFF1 and IFF2 when an interrupt is taken on the Z80
|
| Sun, 02 Jun 2013 21:12:43 -0700 |
Mike Pavone |
Fix YM2612 busy flag
|
| Sun, 02 Jun 2013 21:12:26 -0700 |
Mike Pavone |
Fix cycle count for inc and dec
|
| Sun, 02 Jun 2013 20:14:27 -0700 |
Mike Pavone |
Bunch of Z80 debugger improvements
|
| Sun, 02 Jun 2013 13:42:33 -0700 |
Mike Pavone |
Use signed ints for things that represent signed values in YM2612 core
|
| Sun, 02 Jun 2013 00:00:22 -0700 |
Mike Pavone |
Fix register to operator mapping. Fix rate table generation. Add TL to envelope value rather than using it as a limit for the attack phase.
|
| Fri, 31 May 2013 21:30:11 -0700 |
Mike Pavone |
Fix left/right enable default value
|
| Fri, 31 May 2013 20:47:34 -0700 |
Mike Pavone |
Make the n command in the Z80 debugger actually run the next instruction without needing a c command
|
| Fri, 31 May 2013 20:46:56 -0700 |
Mike Pavone |
Fix P condition in Z80 core
|
| Fri, 31 May 2013 19:43:13 -0700 |
Mike Pavone |
Partial implementation of Z80 debugger
|
| Wed, 29 May 2013 21:21:14 -0700 |
Mike Pavone |
Actually save the shifted phase inc after applying the block shift
|
| Wed, 29 May 2013 00:57:19 -0700 |
Mike Pavone |
Incredibly broken YM2612 support plus a fix to Z80 bus request
|
| Wed, 29 May 2013 00:13:48 -0700 |
Mike Pavone |
Fix push AF
|
| Mon, 27 May 2013 22:19:11 -0700 |
Mike Pavone |
YM2612 WIP update
|
