Mercurial > repos > blastem
view zruntime.S @ 2321:2eda5f81f91e
More fully baked ROM db support for SMS
author | Michael Pavone <pavone@retrodev.com> |
---|---|
date | Thu, 15 Jun 2023 09:36:11 -0700 |
parents | e13f4fd9cf6d |
children |
line wrap: on
line source
z_inccycles_io: cmp %edi, %ebp jnb do_limit no_sync_io: add $4, %ebp ret do_limit_io: cmp 112(%rsi), %ebp jb no_sync_io jmp sync_io z_inccycles: cmp %edi, %ebp jnb do_limit no_sync: add $3, %ebp ret do_limit: cmp 112(%rsi), %ebp jb no_sync sync_io: movw $0, 164(%rsi) call z80_save_context_scratch pop %rax /*return address in read/write func*/ pop 104(%rsi) /*return address in native code*/ sub $5, %rax /* adjust return addres to point to the call instruction that got us here */ mov %rax, (%rsi) pop %r15 /* restore callee saved regsiters */ pop %r14 pop %r13 pop %r12 pop %rbp pop %rbx ret /* return to caller of z80_run */ forced_sync: movw $0, 164(%rsi) call z80_save_context_scratch pop (%rsi) /*return address in read/write func*/ pop 104(%rsi) /*return address in native code*/ pop %r15 /* restore callee saved regsiters */ pop %r14 pop %r13 pop %r12 pop %rbp pop %rbx ret /* return to caller of z80_run */ .global z80_handle_cycle_limit_int z80_handle_cycle_limit_int: cmp 116(%rsi), %ebp jb zskip_int mov 112(%rsi), %ebp /* set cycle limit to sync cycle */ /* not sure this is really necessary now that IFF1 and IFF2 are geting cleared */ movl $0xFFFFFFFF, 116(%rsi) /* make sure the interrupt doesn't fire more than once */ /* disable interrupts */ movb $0, 96(%rsi) movb $0, 97(%rsi) add $7, %ebp sub $2, %r9w mov %r9w, %r14w call z_inccycles push %r13 call z80_write_byte_noinc pop %r13 mov %r9w, %r14w add $1, %r14w shr $8, %r13w call z_inccycles call z80_write_byte_noinc pop %r14 /*dispose of return address */ /* TODO: Support interrupt mode 0 and 2 */ mov $0x38, %r13w call z80_native_addr jmp *%r13 zskip_int: cmp 112(%rsi), %ebp jb zskip_sync mov %r13w, 164(%rsi) .global z80_do_sync z80_do_sync: call z80_save_context pop (%rsi) /*return address in native code*/ pop %r15 /* restore callee saved regsiters */ pop %r14 pop %r13 pop %r12 pop %rbp pop %rbx zskip_sync: ret .global z80_halt z80_halt: mov %edi, %r14d sub %ebp, %r14d and $0xFFFFFFFC, %r14d add %r14d, %ebp cmp %edi, %ebp jnb z80_handle_cycle_limit_int add $4, %ebp jmp z80_handle_cycle_limit_int .global z80_read_byte z80_read_byte: call z_inccycles z80_read_byte_noinc: cmp $0x4000, %r13w jb z80_read_ram cmp $0x8000, %r13w jae z80_read_bank cmp $0x6000, %r13w jb z80_read_ym2612 /* TODO: Bank reg, YM-2612, PSG/VDP */ mov $0xFF, %r13b ret z80_read_ram: and $0x1FFF, %r13 mov (%r11, %r13), %r13b ret z80_read_bank: /* approximation of wait states for normal 68K bus access */ add $3, %ebp push %rsi mov 144(%rsi), %rsi /* get system context pointer */ cmpb $0, 120(%rsi) /* check bus busy flag */ pop %rsi jne bus_busy z80_read_bank_cont: and $0x7FFF, %r13 cmp $0, %r12 je slow_bank_read /* 68K memory is byte swapped */ xor $1, %r13 mov (%r12, %r13), %r13b ret slow_bank_read: /* TODO: Call into C to implement this */ ret bus_busy: cmp %ebp, %edi jbe no_adjust mov %edi, %ebp no_adjust: call forced_sync jmp z80_read_bank_cont z80_read_ym2612: call z80_save_context mov %r13w, %di push %rsi test $8, %rsp jnz 0f call z80_read_ym jmp 1f 0: sub $8, %rsp call z80_read_ym add $8, %rsp 1: pop %rsi mov %al, %r13b call z80_load_context ret .global z80_write_byte z80_write_byte: call z_inccycles z80_write_byte_noinc: cmp $0x4000, %r14w jb z80_write_ram cmp $0x8000, %r14w jae z80_write_bank cmp $0x6000, %r14w jb z80_write_ym2612 cmp $0x6100, %r14w jb z80_write_bank_reg cmp $0x7F00, %r14w jae z80_write_vdp ret z80_write_ram: and $0x1FFF, %r14 mov %r13b, (%r11, %r14) mov %r14d, %r13d shr $7, %r13d bt %r13d, 152(%rsi) jnc not_code call z80_save_context mov %r14d, %edi call z80_handle_code_write mov %rax, %rsi call z80_load_context not_code: ret z80_write_bank: slow_bank_write: /* approximation of wait states for 68K bus access */ add $3, %ebp /* TODO: Call into C to implement this */ ret z80_write_ym2612: and $0x3, %r14w call z80_save_context mov %r14w, %di mov %r13b, %dl test $8, %rsp jnz 0f call z80_write_ym jmp 1f 0: sub $8, %rsp call z80_write_ym add $8, %rsp 1: mov %rax, %rsi jmp z80_load_context z80_write_bank_reg: and $1, %r13w shr %r15w shl $8, %r13w xor %r12, %r12 or %r13w, %r15w and $0x1FF, %r15w cmp $0x80, %r15w jb update_bank_ptr ret update_bank_ptr: mov %r15w, %r12w shl $15, %r12 add 80(%rsi), %r12 ret z80_write_vdp: and $0xFF, %r14w call z80_save_context mov %r14w, %di mov %r13b, %dl test $8, %rsp jnz 0f call z80_vdp_port_write jmp 1f 0: sub $8, %rsp call z80_vdp_port_write add $8, %rsp 1: mov %rax, %rsi jmp z80_load_context .global z80_read_word z80_read_word: call z_inccycles cmp $0x8000, %r13w jae z80_read_bank_word push %r13 call z80_read_byte_noinc mov %r13b, %r14b pop %r13 inc %r13 call z_inccycles call z80_read_byte_noinc shl $8, %r13w mov %r14b, %r13b ret z80_read_bank_word: add $3, %ebp /* first read typically has 3 wait states */ push %rsi mov 144(%rsi), %rsi /* get system context pointer */ cmpb $0, 120(%rsi) /* check bus busy flag */ pop %rsi jne bus_busy_word z80_read_bank_word_cont: push %r13 call z80_read_bank_cont mov %r13b, %r14b pop %r13 inc %r13 call z_inccycles add $4, %ebp /* second read typically has 4 wait states */ push %rsi mov 144(%rsi), %rsi /* get system context pointer */ cmpb $0, 120(%rsi) /* check bus busy flag */ pop %rsi jne bus_busy_word2 z80_read_bank_word_cont2: call z80_read_bank_cont shl $8, %r13w mov %r14b, %r13b ret bus_busy_word: cmp %ebp, %edi jb no_adjust_word mov %edi, %ebp no_adjust_word: call forced_sync jmp z80_read_bank_word_cont foofoo: jmp foofoo bus_busy_word2: cmp %ebp, %edi jb no_adjust_word2 mov %edi, %ebp no_adjust_word2: call forced_sync jmp z80_read_bank_word_cont2 blahblah: jmp blahblah .global z80_write_word_highfirst z80_write_word_highfirst: call z_inccycles push %r14 push %r13 add $1, %r14w shr $8, %r13w call z80_write_byte_noinc pop %r13 pop %r14 call z_inccycles call z80_write_byte_noinc ret .global z80_write_word_lowfirst z80_write_word_lowfirst: call z_inccycles push %r14 push %r13 call z80_write_byte_noinc pop %r13 pop %r14 add $1, %r14w shr $8, %r13w call z_inccycles call z80_write_byte_noinc ret .global z80_io_read z80_io_read: call z_inccycles_io /* genesis Z80 has no IO port hardware and always returns FF */ mov $0xFF, %r13 ret .global z80_io_write z80_io_write: call z_inccycles_io /* genesis Z80 has no IO port hardware and writes have no effect */ ret .global z80_retrans_stub z80_retrans_stub: pop %r14 call z80_save_context /* adjust for mov and call instructions */ sub $11, %r14 mov %r13d, %edi mov %r14, %rdx push %rsi call z80_retranslate_inst pop %rsi mov %rax, %r13 call z80_load_context jmp *%r13 .global z80_native_addr z80_native_addr: call z80_save_context push %rsi mov %rsi, %rdi movzx %r13w, %esi call z80_get_native_address_trans mov %rax, %r13 pop %rsi call z80_load_context ret z80_save_context_scratch: mov %r13w, 98(%rsi) /* scratch1 */ mov %r14w, 100(%rsi) /* scratch2 */ .global z80_save_context z80_save_context: mov %r9w, 8(%rsi) /* SP */ mov %r15w, 16(%rsi) /* bank register */ mov %bx, 18(%rsi) /* BC */ mov %cx, 20(%rsi) /* DE */ mov %ax, 22(%rsi) /* HL */ mov %dx, 24(%rsi) /* IX */ mov %r8w, 26(%rsi) /* IY */ mov %r10b, 30(%rsi) /* A */ mov %edi, 48(%rsi) /* target_cycle */ mov %ebp, 52(%rsi) /* current_cycle */ mov %r12, 72(%rsi) /* cartridge bank pointer */ ret z80_load_context_scratch: mov 98(%rsi), %r13w /* scratch1 */ mov 100(%rsi), %r14w /* scratch2 */ .global z80_load_context z80_load_context: mov 8(%rsi), %r9w /* SP */ mov 16(%rsi), %r15w /* bank register */ mov 18(%rsi), %bx /* BC */ mov 20(%rsi), %cx /* DE */ mov 22(%rsi), %ax /* HL */ mov 24(%rsi), %dx /* IX */ mov 26(%rsi), %r8w /* IY */ mov 30(%rsi), %r10b /* A */ mov 48(%rsi), %edi /* target_cycle */ mov 52(%rsi), %ebp /* current_cycle */ mov 64(%rsi), %r11 /* z80 RAM */ mov 72(%rsi), %r12 /* cartridge bank pointer */ ret .global z80_run z80_run: push %rbx push %rbp push %r12 push %r13 push %r14 push %r15 mov %rdi, %rsi call z80_load_context_scratch cmpq $0, 104(%rsi) je no_extra push 104(%rsi) movq $0, 104(%rsi) no_extra: jmp *(%rsi)