Mercurial > repos > blastem
view ym2612.h @ 2316:523ab225815b
Allow dpad to increment/decrement property fields
author | Michael Pavone <pavone@retrodev.com> |
---|---|
date | Sun, 02 Apr 2023 23:21:04 -0700 |
parents | dec3287c9394 |
children |
line wrap: on
line source
/* Copyright 2013 Michael Pavone This file is part of BlastEm. BlastEm is free software distributed under the terms of the GNU General Public License version 3 or greater. See COPYING for full license text. */ #ifndef YM2612_H_ #define YM2612_H_ #include <stdint.h> #include <stdio.h> #include "serialize.h" #include "render_audio.h" #include "vgm.h" #include "oscilloscope.h" #define NUM_PART_REGS (0xB7-0x30) #define NUM_CHANNELS 6 #define NUM_OPERATORS (4*NUM_CHANNELS) #define YM_OPT_WAVE_LOG 1 #define YM_OPT_3834 2 typedef struct { int16_t *mod_src[2]; uint32_t phase_counter; uint32_t phase_inc; uint16_t envelope; int16_t output; uint16_t total_level; uint16_t sustain_level; uint8_t rates[4]; uint8_t key_scaling; uint8_t multiple; uint8_t detune; uint8_t am; uint8_t env_phase; uint8_t ssg; uint8_t inverted; uint8_t phase_overflow; } ym_operator; typedef struct { FILE * logfile; uint16_t fnum; int16_t output; int16_t op1_old; int16_t op2_old; uint8_t block_fnum_latch; uint8_t block; uint8_t keycode; uint8_t algorithm; uint8_t feedback; uint8_t ams; uint8_t pms; uint8_t lr; uint8_t keyon; uint8_t scope_channel; uint8_t phase_overflow; } ym_channel; typedef struct { uint16_t fnum; uint8_t block; uint8_t block_fnum_latch; uint8_t keycode; } ym_supp; #define YM_PART1_START 0x21 #define YM_PART2_START 0x30 #define YM_REG_END 0xB8 #define YM_PART1_REGS (YM_REG_END-YM_PART1_START) #define YM_PART2_REGS (YM_REG_END-YM_PART2_START) typedef struct { audio_source *audio; vgm_writer *vgm; oscilloscope *scope; uint32_t clock_inc; uint32_t current_cycle; uint32_t write_cycle; uint32_t busy_start; uint32_t busy_cycles; uint32_t last_status_cycle; uint32_t invalid_status_decay; uint32_t status_address_mask; int32_t volume_mult; int32_t volume_div; ym_operator operators[NUM_OPERATORS]; ym_channel channels[NUM_CHANNELS]; int16_t zero_offset; uint16_t timer_a; uint16_t timer_a_load; uint16_t env_counter; ym_supp ch3_supp[3]; uint8_t timer_b; uint8_t sub_timer_b; uint8_t timer_b_load; uint8_t ch3_mode; uint8_t current_op; uint8_t current_env_op; uint8_t timer_control; uint8_t dac_enable; uint8_t lfo_enable; uint8_t lfo_freq; uint8_t lfo_counter; uint8_t lfo_am_step; uint8_t lfo_pm_step; uint8_t csm_keyon; uint8_t status; uint8_t last_status; uint8_t selected_reg; uint8_t selected_part; uint8_t part1_regs[YM_PART1_REGS]; uint8_t part2_regs[YM_PART2_REGS]; } ym2612_context; enum { REG_LFO = 0x22, REG_TIMERA_HIGH = 0x24, REG_TIMERA_LOW, REG_TIMERB, REG_TIME_CTRL, REG_KEY_ONOFF, REG_DAC = 0x2A, REG_DAC_ENABLE, REG_DETUNE_MULT = 0x30, REG_TOTAL_LEVEL = 0x40, REG_ATTACK_KS = 0x50, REG_DECAY_AM = 0x60, REG_SUSTAIN_RATE = 0x70, REG_S_LVL_R_RATE = 0x80, REG_SSG_EG = 0x90, REG_FNUM_LOW = 0xA0, REG_BLOCK_FNUM_H = 0xA4, REG_FNUM_LOW_CH3 = 0xA8, REG_BLOCK_FN_CH3 = 0xAC, REG_ALG_FEEDBACK = 0xB0, REG_LR_AMS_PMS = 0xB4 }; void ym_init(ym2612_context * context, uint32_t master_clock, uint32_t clock_div, uint32_t options); void ym_reset(ym2612_context *context); void ym_free(ym2612_context *context); void ym_enable_zero_offset(ym2612_context *context, uint8_t enabled); void ym_adjust_master_clock(ym2612_context * context, uint32_t master_clock); void ym_adjust_cycles(ym2612_context *context, uint32_t deduction); void ym_run(ym2612_context * context, uint32_t to_cycle); void ym_address_write_part1(ym2612_context * context, uint8_t address); void ym_address_write_part2(ym2612_context * context, uint8_t address); void ym_data_write(ym2612_context * context, uint8_t value); void ym_vgm_log(ym2612_context *context, uint32_t master_clock, vgm_writer *vgm); uint8_t ym_read_status(ym2612_context * context, uint32_t cycle, uint32_t port); uint8_t ym_load_gst(ym2612_context * context, FILE * gstfile); uint8_t ym_save_gst(ym2612_context * context, FILE * gstfile); void ym_print_channel_info(ym2612_context *context, int channel); void ym_print_timer_info(ym2612_context *context); void ym_serialize(ym2612_context *context, serialize_buffer *buf); void ym_deserialize(deserialize_buffer *buf, void *vcontext); void ym_enable_scope(ym2612_context *context, oscilloscope *scope, uint32_t master_clock); #endif //YM2612_H_