Mercurial > repos > blastem
graph
-
Implement basic joystick supportSun, 23 Jun 2013 22:27:12 -0700, by Mike Pavone
-
Fix window layer in double res interlace modeSun, 23 Jun 2013 12:27:11 -0700, by Mike Pavone
-
Change buffer size to avoid weird artifacts on some systemsSun, 23 Jun 2013 11:25:56 -0700, by Mike Pavone
-
Fix sprite y mask in interlace mode. Fix framebuffer selection when switching out of interlace mode.Sun, 23 Jun 2013 10:17:40 -0700, by Mike Pavone
-
Fix vscroll calculation in double resultion interlace modeSun, 23 Jun 2013 09:17:19 -0700, by Mike Pavone
-
Initial work on interlaceSat, 22 Jun 2013 21:19:43 -0700, by Mike Pavone
-
Fix movem with pc displacement or pc indexed sourceWed, 19 Jun 2013 00:40:13 -0700, by Mike Pavone
-
Initial stab at LFO phase modulationWed, 19 Jun 2013 00:25:09 -0700, by Mike Pavone
-
Use a slightly more sane PSG volume divider. Stil seems too loud, need to check the real hardware.Wed, 19 Jun 2013 00:24:59 -0700, by Mike Pavone
-
Process events in vgm player so that quitting worksMon, 17 Jun 2013 19:34:47 -0700, by Mike Pavone
-
Add primitive vgm player for testingMon, 17 Jun 2013 00:54:14 -0700, by Mike Pavone
-
Add support for logging YM2612 channels to WAVE filesSun, 16 Jun 2013 17:57:57 -0700, by Mike Pavone
-
Fix modulation condition for operator 2Sun, 16 Jun 2013 13:42:13 -0700, by Mike Pavone
-
Implement writes from 68K to Z80 bank register and make reads from port c control register return 0 againSun, 16 Jun 2013 13:25:45 -0700, by Mike Pavone
-
Minor refactor of io_read functions to avoid duplication of logic between byte and word versionsSun, 16 Jun 2013 11:59:45 -0700, by Mike Pavone
-
Fix YM2612 timersSun, 16 Jun 2013 00:56:23 -0700, by Mike Pavone
-
Assert z80 interrupt longer so that they are not missed when they should not beSat, 15 Jun 2013 23:50:59 -0700, by Mike Pavone
-
Fix DISat, 15 Jun 2013 23:10:48 -0700, by Mike Pavone
-
Have test generator test both flag register 0 case and flag register FF caseSat, 15 Jun 2013 23:10:37 -0700, by Mike Pavone
-
Fix adc and sbcFri, 14 Jun 2013 23:27:01 -0700, by Mike Pavone
-
Make keybindings data driven so they can be populated from a config file laterFri, 14 Jun 2013 00:25:04 -0700, by Mike Pavone
-
Fix LDIRThu, 13 Jun 2013 22:23:15 -0700, by Mike Pavone
-
Fix output of algorithm 4 and make some other minor YM2612 core improvementsTue, 11 Jun 2013 23:36:18 -0700, by Mike Pavone
-
Add debugger command for saving Z80 RAM to a fileTue, 11 Jun 2013 23:10:33 -0700, by Mike Pavone
-
Bail out on attempt to run code from bank area until it is properly supportedTue, 11 Jun 2013 23:09:57 -0700, by Mike Pavone
-
Fix address adjustement in z80_retrans_stubSun, 09 Jun 2013 02:38:56 -0700, by Mike Pavone
-
Z80 debugger improvementsSun, 09 Jun 2013 02:03:26 -0700, by Mike Pavone
-
Check memory results in ztestgenSat, 08 Jun 2013 12:59:23 -0700, by Mike Pavone
-
Use a call instruction to figure out the original native address when retranslating so that it does not get lost when the byte transforms from a instruction word to extension wordSat, 08 Jun 2013 11:31:52 -0700, by Mike Pavone
-
Removed out of date TODOThu, 06 Jun 2013 08:45:54 -0700, by Mike Pavone
-
Fix LDD and LDDRThu, 06 Jun 2013 08:19:25 -0700, by Mike Pavone
-
Fix dec and inc when the operand is in memoryWed, 05 Jun 2013 22:55:23 -0700, by Mike Pavone
-
Fix channel mapping in key on/off registerWed, 05 Jun 2013 19:26:02 -0700, by Mike Pavone
-
Fix LDIWed, 05 Jun 2013 18:47:39 -0700, by Mike Pavone
-
Fix set/res when the operand is in memoryTue, 04 Jun 2013 22:30:49 -0700, by Mike Pavone
-
Initial implementation of channel 3 special modeTue, 04 Jun 2013 21:23:12 -0700, by Mike Pavone
-
Fix operator precedence bug with sustain levelTue, 04 Jun 2013 09:16:41 -0700, by Mike Pavone
-
Fix modulation shift valueMon, 03 Jun 2013 23:44:11 -0700, by Mike Pavone
-
Make shift value of operator output to modulation input a defineSun, 02 Jun 2013 22:37:48 -0700, by Mike Pavone
-
Adjust shift for feedbackSun, 02 Jun 2013 22:33:27 -0700, by Mike Pavone
-
Initial stab at feedbackSun, 02 Jun 2013 22:30:41 -0700, by Mike Pavone
-
Fix key scalingSun, 02 Jun 2013 21:52:42 -0700, by Mike Pavone
-
Clear IFF1 and IFF2 when an interrupt is taken on the Z80Sun, 02 Jun 2013 21:38:18 -0700, by Mike Pavone
-
Fix YM2612 busy flagSun, 02 Jun 2013 21:12:43 -0700, by Mike Pavone
-
Fix cycle count for inc and decSun, 02 Jun 2013 21:12:26 -0700, by Mike Pavone
-
Bunch of Z80 debugger improvementsSun, 02 Jun 2013 20:14:27 -0700, by Mike Pavone
-
Use signed ints for things that represent signed values in YM2612 coreSun, 02 Jun 2013 13:42:33 -0700, by Mike Pavone
-
Fix register to operator mapping. Fix rate table generation. Add TL to envelope value rather than using it as a limit for the attack phase.Sun, 02 Jun 2013 00:00:22 -0700, by Mike Pavone
-
Fix left/right enable default valueFri, 31 May 2013 21:30:11 -0700, by Mike Pavone
-
Make the n command in the Z80 debugger actually run the next instruction without needing a c commandFri, 31 May 2013 20:47:34 -0700, by Mike Pavone
-
Fix P condition in Z80 coreFri, 31 May 2013 20:46:56 -0700, by Mike Pavone
-
Partial implementation of Z80 debuggerFri, 31 May 2013 19:43:13 -0700, by Mike Pavone
-
Actually save the shifted phase inc after applying the block shiftWed, 29 May 2013 21:21:14 -0700, by Mike Pavone
-
Incredibly broken YM2612 support plus a fix to Z80 bus requestWed, 29 May 2013 00:57:19 -0700, by Mike Pavone
-
Fix push AFWed, 29 May 2013 00:13:48 -0700, by Mike Pavone