Thu, 28 May 2015 21:19:55 -0700 |
Michael Pavone |
Merge windows branch with latest changes
|
Thu, 28 May 2015 21:09:33 -0700 |
Michael Pavone |
Adjusted Makefile to support linking against the static glew library from the standard download
|
Tue, 01 Apr 2014 21:12:00 -0700 |
Michael Pavone |
Make Windows port a little less half-assed
|
Tue, 01 Apr 2014 19:43:58 -0700 |
Michael Pavone |
Initial work on Windows port
|
Thu, 28 May 2015 00:11:15 -0700 |
Michael Pavone |
Fix LFO counter update speed and implement amplitude modulation
|
Wed, 27 May 2015 20:53:21 -0700 |
Michael Pavone |
Add a basic YM-2612 command to the debugger. Fix negative detune values and get the correct precision for the multiplication step of phase inc calculation
|
Tue, 26 May 2015 22:22:30 -0700 |
Michael Pavone |
Fix register to operator mapping for channel 3 special mode
|
Tue, 26 May 2015 20:00:50 -0700 |
Michael Pavone |
Fixes for the 32-bit build accidentally introduced a bug into the 64-bit build, this commit fixes the regression
|
Mon, 25 May 2015 23:37:13 -0700 |
Michael Pavone |
Implement cycles being stolen from 68K when the Z80 accesses the bank area or VDP/PSG. Small fix to code that tries to get system into a consistent state for a savestate
|
Mon, 25 May 2015 18:56:22 -0700 |
Michael Pavone |
Add a define in both the source and Makefile for enabling logging of z80 instruction address/cycle counts. Fix Z80 in/out instructions to eliminate assumptions about which registers are stored in native regs. Fix read_16 to not corrupt the low byte when the read has to call into a C function.
|
Mon, 25 May 2015 17:08:56 -0700 |
Michael Pavone |
Fix RLD and RRD for the case in which HL does not map to a native register
|
Mon, 25 May 2015 15:01:38 -0700 |
Michael Pavone |
Fix crash bug in 32-bit build for certain secnarios with bcd instructions
|
Mon, 25 May 2015 13:21:24 -0700 |
Michael Pavone |
Fix div instruction when dest is d0 in 32-bit build
|
Sun, 24 May 2015 21:11:18 -0700 |
Michael Pavone |
Z80 test cases that passed on 64-bit now pass on 32-bit
|
Sun, 24 May 2015 15:05:18 -0700 |
Michael Pavone |
More bugfixes for the 32-bit build of the Z80 core
|
Sat, 23 May 2015 20:26:20 -0700 |
Michael Pavone |
Fix a bunch of assumptions about which Z80 registers are stored in native registers to make the x86-32 build less broken
|
Sat, 23 May 2015 20:25:16 -0700 |
Michael Pavone |
Generate an error in x86-32 builds for most cases when a REX prefix would be generated
|
Sat, 23 May 2015 20:24:27 -0700 |
Michael Pavone |
Eliminate runtime.S/runtime_32.S.
|
Fri, 22 May 2015 23:49:32 -0700 |
Michael Pavone |
Don't attempt to translate or map code at odd addresses. This fixes a bug that shows up when playing College Footbal USA 96
|
Fri, 22 May 2015 21:11:41 -0700 |
Michael Pavone |
Fix out of bounds memory access when an instruction wraps around the end of memory
|
Fri, 22 May 2015 18:38:44 -0700 |
Michael Pavone |
Fix bug in vdp_next_hint that was causing HINTs to fire repeatedly when they should not have fired at all based on an HINT interval that was larger than the number of active lines in the display
|
Thu, 21 May 2015 18:37:41 -0700 |
Michael Pavone |
Process events while waiting for 68K debugger input. This prevents "not responsive" dialogs when sitting in the debugger
|
Thu, 21 May 2015 00:55:46 -0700 |
Michael Pavone |
Restore the other 2 debug display modes
|
Wed, 20 May 2015 23:34:12 -0700 |
Michael Pavone |
Better handling of savestate and debug break events with "uncooperative" games/demos
|
Wed, 20 May 2015 22:27:51 -0700 |
Michael Pavone |
Add some tests for hint timing and fix it properly this time.
|
Wed, 20 May 2015 19:05:11 -0700 |
Michael Pavone |
Upgrade to SDL 2.0 and drop support for the non-OpenGL render path
|
Wed, 20 May 2015 10:35:03 -0700 |
Michael Pavone |
Update vscroll latch implementation to be more in line with what Eke-Eke has observed. Revert the change to vdp_cycles_to_line because it breaks hints on line 0. H-Int timing is still a little messed up, but the previous change made things worse.
|
Tue, 19 May 2015 23:23:53 -0700 |
Michael Pavone |
Small correction to VBLANK flag timing. Fixed some inconsistencies in interrupt timing calculation.
|
Sun, 17 May 2015 20:03:27 -0700 |
Michael Pavone |
Make sure z80_save_reg does nothing when there is no register in the reg field of the instruction. This fixes a bug that corrupted SP in the MDEM 2011 demo
|
Sun, 17 May 2015 19:14:41 -0700 |
Michael Pavone |
Call z80_handle_deferred after generating an insruction handler so that instructions like rst work correctly
|
Sun, 17 May 2015 15:43:20 -0700 |
Michael Pavone |
Fix VDP status register PAL bit based on observations of the Titan Overdrive demo
|
Sun, 17 May 2015 15:41:15 -0700 |
Michael Pavone |
Don't overwrite an instruction offset mapping with an extension word value. I really need the ability for a word to be mapped to more than one instruction, but this will be more correct for now
|
Sun, 17 May 2015 15:40:31 -0700 |
Michael Pavone |
Fix crash bug in Z80 interpreter
|
Sat, 16 May 2015 23:08:07 -0700 |
Michael Pavone |
Adjust H32 vint slot in response to latest test ROM data
|
Sat, 16 May 2015 23:04:57 -0700 |
Michael Pavone |
First pass at emulating a vscroll latch. Titan's Overdrive demo seems to depend on the scroll value being latched early in the line before the HINT gets a chance to change it
|
Sat, 16 May 2015 22:42:26 -0700 |
Michael Pavone |
Fix trans so it compiles again
|
Thu, 14 May 2015 23:17:55 -0700 |
Michael Pavone |
Small horizontal interrupt fixes
|
Thu, 14 May 2015 00:04:22 -0700 |
Michael Pavone |
Sync machine state before entering debugger
|
Wed, 13 May 2015 23:55:02 -0700 |
Michael Pavone |
Fix problem with removing breakpoints
|
Wed, 13 May 2015 19:19:43 -0700 |
Michael Pavone |
Add description of cd register value to vr debugger command
|
Wed, 13 May 2015 19:13:49 -0700 |
Michael Pavone |
Properly print equ for named labels that point outside the cartridge area in disassembler
|
Wed, 13 May 2015 19:13:15 -0700 |
Michael Pavone |
Get save state viewer compiling again
|
Tue, 12 May 2015 19:14:09 -0700 |
Michael Pavone |
Save PC to context struct when syncing Z80 at instruction start. This fixes saving savestates and probably the Z80 debugger as well
|
Mon, 11 May 2015 20:34:33 -0700 |
Michael Pavone |
Remove/comment verbose logging added for tracking down sync bug
|
Mon, 11 May 2015 20:31:59 -0700 |
Michael Pavone |
Tiny cleanup
|
Mon, 11 May 2015 20:30:35 -0700 |
Michael Pavone |
Fix frame counter increment and VINT cycle time calculation
|
Mon, 11 May 2015 20:30:13 -0700 |
Michael Pavone |
Fixed a missed call to do_sync when updating SR in 68K core
|
Mon, 11 May 2015 00:28:47 -0700 |
Michael Pavone |
Sync fixes and logging to fix more sync issues
|
Tue, 05 May 2015 08:42:27 -0700 |
Michael Pavone |
Added config option to allow specifying a max sync cycle smaller than the end of frame
|
Mon, 04 May 2015 08:48:10 -0700 |
Michael Pavone |
Indentation fixup
|
Thu, 30 Apr 2015 19:28:18 -0700 |
Michael Pavone |
Adjust TH timeout value to take into account the move to master clock cycles
|
Thu, 30 Apr 2015 19:28:01 -0700 |
Michael Pavone |
Fix missing call to setup_io_devices
|
Tue, 28 Apr 2015 19:04:36 -0700 |
Michael Pavone |
Fix bug in map_native_address that was breaking some self-modifying code in Gunstar Heroes
|
Sat, 14 Mar 2015 12:05:03 -0700 |
Michael Pavone |
WIP of functions to determine size of x86 instruction to allow patching of arbitrary pieces of code
|
Wed, 14 Jan 2015 09:38:54 -0800 |
Michael Pavone |
Removed hardcoded assumptions in M68K core about which parts of the memory map are RAM
|
Thu, 08 Jan 2015 23:20:41 -0800 |
Michael Pavone |
A couple more indentation fixes
|
Thu, 08 Jan 2015 21:00:21 -0800 |
Michael Pavone |
Moved m68k_save_result to m68k_core.c
|
Thu, 08 Jan 2015 19:11:56 -0800 |
Michael Pavone |
Moved translate_m68k_rte and translate_m68k_reset to m68k_core.c
|
Thu, 08 Jan 2015 09:36:54 -0800 |
Michael Pavone |
Fix indentation that presumably got messed up in a merge
|
Thu, 08 Jan 2015 07:49:16 +0100 |
Michael Pavone |
Merge
|
Wed, 07 Jan 2015 22:42:35 -0800 |
Michael Pavone |
Added ldr and str instructions to gen_arm
|
Tue, 06 Jan 2015 19:09:00 -0800 |
Michael Pavone |
Move detect_region down so that it once again occurs after load_rom since it won't work before the ROM is loaded
|
Sun, 04 Jan 2015 23:35:55 -0800 |
Michael Pavone |
Merge
|
Sun, 04 Jan 2015 23:21:56 -0800 |
Michael Pavone |
Prevent an infinite loop when handling out of bounds addresses in translate_m68k_stream
|
Sun, 04 Jan 2015 23:05:37 -0800 |
Michael Pavone |
Some small synchronization improvements that do not seem to fix anything
|
Sun, 04 Jan 2015 12:25:33 -0800 |
Michael Pavone |
Removed some code that tried to deal with the 68K not using master clocks that is no longer necessary
|
Sun, 04 Jan 2015 12:24:34 -0800 |
Michael Pavone |
Adjusted h40_hsync_cycles so that lines actually take 3420 mclks. Fixed vdp_cycles_next_line to take h40_sync_cycles into account
|
Sat, 03 Jan 2015 21:54:41 -0800 |
Michael Pavone |
Fake busack when Z80 is disabled
|
Sat, 03 Jan 2015 21:35:23 -0800 |
Michael Pavone |
When going directly from reset to busreq, do not allow the Z80 to run
|
Sat, 03 Jan 2015 21:20:18 -0800 |
Michael Pavone |
Added a -r flag to ztestrun that force instruction retranslation to allow a quick sanity test of that feature
|
Sat, 03 Jan 2015 20:46:45 -0800 |
Michael Pavone |
Fix ztestrun
|
Sat, 03 Jan 2015 20:46:25 -0800 |
Michael Pavone |
Fix 68K remove_breakpoint
|
Sat, 03 Jan 2015 20:20:15 -0800 |
Michael Pavone |
Restore emulation of Z80 being locked out of the 68K bus during DMA and the like
|
Sat, 03 Jan 2015 20:13:51 -0800 |
Michael Pavone |
Fix bank area access delay for master clock change
|
Sat, 03 Jan 2015 18:49:07 -0800 |
Michael Pavone |
Restore Z80 interrupt pulse duration and make a small improvement to debug print output
|
Sat, 03 Jan 2015 18:27:29 -0800 |
Michael Pavone |
Removed some obsolete defines
|
Sat, 03 Jan 2015 18:23:04 -0800 |
Michael Pavone |
Made the Z80 core more contained by refactoring some code in blastem.c into z80_to_x86.c
|
Sat, 03 Jan 2015 16:08:23 -0800 |
Michael Pavone |
All cycle counters are now based off the master clock. This seems to have messed up Z80 interrupt timing (music in Sonic 2 is too slow for instance), but things are generally working
|
Fri, 02 Jan 2015 13:47:34 -0800 |
Michael Pavone |
In theory, the Z80 core should work on 32-bit builds now; however, I suspect there is some code that cannot deal with most of the Z80 registers not having a native register so more work will be needed
|
Fri, 02 Jan 2015 13:14:09 -0800 |
Michael Pavone |
Added functions to gen_x86 for saving and restoring callee save registers to better abstract over ABI differences between x86 and x86-64
|
Fri, 02 Jan 2015 12:04:58 -0800 |
Michael Pavone |
Use SZ_PTR instead of SZ_Q in Z80 core for 32-bit compat
|
Fri, 02 Jan 2015 00:19:10 -0800 |
Michael Pavone |
Sync Z80 when taking an interrupt so that int_cycle gets updated
|
Thu, 01 Jan 2015 23:37:24 -0800 |
Michael Pavone |
Remove dedicated registers for Z80 bank reg and Z80 bank pointer as they are no longer used
|
Thu, 01 Jan 2015 22:52:18 -0800 |
Michael Pavone |
Adjust 68K sync cycle when mclk_target gets adjusted
|
Thu, 01 Jan 2015 22:18:32 -0800 |
Michael Pavone |
Add the 3 cycle delay back in to Z80 bank area access
|
Thu, 01 Jan 2015 20:26:22 -0800 |
Michael Pavone |
Minor Z80 core cleanup
|
Thu, 01 Jan 2015 20:21:20 -0800 |
Michael Pavone |
Use call_args and call_args_abi inside gen_mem_fun
|
Thu, 01 Jan 2015 20:07:47 -0800 |
Michael Pavone |
Use call_args and call_args_abi in Z80 core
|
Thu, 01 Jan 2015 19:15:05 -0800 |
Michael Pavone |
Added 2 new functions to gen_x86.c for handling passing args according to the C abi of the host system and adapted the code in m68k_core_x86.c to use that instead of doing everything by hand
|
Thu, 01 Jan 2015 17:36:23 -0800 |
Michael Pavone |
Avoid calling atexit(SDL_Quit) until after OpenGL initialization to avoid a segfault on exit when using fglrx
|
Thu, 01 Jan 2015 17:31:59 -0800 |
Michael Pavone |
Fix some issues with 68K instruction retranslation
|
Thu, 01 Jan 2015 14:36:55 -0800 |
Michael Pavone |
Remove some of the hard coded assumptions about the memory map from the CPU cores
|
Tue, 30 Dec 2014 19:11:34 -0800 |
Michael Pavone |
Merge
|
Tue, 16 Dec 2014 01:10:54 -0800 |
Michael Pavone |
Fix flags for rra, rrca, rla and rlca. Fix timing for rr, rrc, rl and rlc when using IX or IY. Fix access to I and R registers (R still needs to be made 7-bit though). Fix flags for ld a, i. The fix for access to I fixes PCM playback in Titan Overdrive and music playback in Crackdown.
|
Tue, 16 Dec 2014 01:05:00 -0800 |
Michael Pavone |
Set the busy flag after a YM-2612 address write
|
Sun, 14 Dec 2014 18:17:29 -0800 |
Michael Pavone |
Added HV counter test ROM source
|
Sun, 14 Dec 2014 18:16:14 -0800 |
Michael Pavone |
Remove object file that was accidentally added
|
Sun, 14 Dec 2014 18:14:50 -0800 |
Michael Pavone |
Fix the HV counter and adjust the slots of certain VDP events
|
Sun, 14 Dec 2014 18:12:00 -0800 |
Michael Pavone |
Produce a listing file when assembling 68K test ROMs
|
Wed, 03 Dec 2014 09:32:32 -0800 |
Michael Pavone |
Initial support for configurable IO, custom IO and sega transfer board emulation
|
Wed, 03 Dec 2014 09:30:01 -0800 |
Michael Pavone |
Temporarily comment out code to translate Z80 instructions in place as in rare cases it can stomp the next instruction if a branch goes from a short from to a long one
|
Wed, 03 Dec 2014 09:26:07 -0800 |
Michael Pavone |
Unbreak PC indexed addressing modes in decoder
|
Wed, 15 Oct 2014 00:30:19 -0700 |
Michael Pavone |
Fix interpretation of moves direction field
|
Wed, 15 Oct 2014 00:26:57 -0700 |
Michael Pavone |
Fix decoding of movec
|
Tue, 14 Oct 2014 22:17:42 -0700 |
Michael Pavone |
Add equates for address references below address_off
|
Tue, 14 Oct 2014 21:58:17 -0700 |
Michael Pavone |
Ignore odd addresses in calls to defer in disassembler
|
Tue, 14 Oct 2014 21:58:03 -0700 |
Michael Pavone |
Add support for 68020 addressing modes in decoder and disassembler
|
Sun, 12 Oct 2014 23:55:25 -0700 |
Michael Pavone |
Tiny bit of work towards supporting 68020 addressing modes in decoder/disassembler
|
Sun, 12 Oct 2014 19:03:05 -0700 |
Michael Pavone |
Add support for 68020 bitfield instructions
|
Sun, 12 Oct 2014 19:02:47 -0700 |
Michael Pavone |
Fix logic for automatic label generation.
|
Sat, 11 Oct 2014 22:18:49 -0700 |
Michael Pavone |
Better support for labels sourced from VOS program module header
|
Sat, 11 Oct 2014 21:42:33 -0700 |
Michael Pavone |
Fix translation of 68K address to buffer location when address_off != 0
|
Sat, 11 Oct 2014 21:20:02 -0700 |
Michael Pavone |
Add -r option to indicate VOS program module contains a 68K reset vector
|
Sat, 11 Oct 2014 20:32:17 -0700 |
Michael Pavone |
Add support for disassembling VOS program modules
|
Wed, 08 Oct 2014 22:18:34 -0700 |
Michael Pavone |
Improve support for disassembling 68010+ binaries
|
Thu, 14 Aug 2014 09:38:32 -0700 |
Michael Pavone |
Small fix to display of DMA source address in vr debug command
|
Sat, 21 Jun 2014 09:36:15 -0700 |
Michael Pavone |
Fix Z80 interrupts
|
Fri, 20 Jun 2014 07:57:32 -0700 |
Michael Pavone |
Added some preliminary support for interpreting Z80 code from non-RAM addresses
|
Thu, 19 Jun 2014 19:50:16 -0700 |
Michael Pavone |
Properly handle Z80 breakpoints on self-modifying code and setting Z80 breakpoints before the Z80 program has been loaded
|
Thu, 19 Jun 2014 08:14:35 -0700 |
Michael Pavone |
Slight cleanup of vint handling on the Z80
|