log

age author description
Sun, 06 Jan 2013 10:54:45 -0800 Mike Pavone Initialize status register to proper value on startup
Sun, 06 Jan 2013 09:51:15 -0800 Mike Pavone Added SMD ROM support
Sat, 05 Jan 2013 22:59:51 -0800 Mike Pavone Fix certain address modes with lea when the destination is not a native register
Sat, 05 Jan 2013 22:59:06 -0800 Mike Pavone Small fix to disassembler
Sat, 05 Jan 2013 02:46:55 -0800 Mike Pavone Fix decoding of movep
Sat, 05 Jan 2013 02:18:31 -0800 Mike Pavone Implement more movem modes src
Sat, 05 Jan 2013 01:55:11 -0800 Mike Pavone Implement more address modes for movem dst and fix a missing break statement in translate_m68k_dst
Sat, 05 Jan 2013 01:32:40 -0800 Mike Pavone Fix crash in printf from "crash" function due to lack of clearing rax
Sat, 05 Jan 2013 01:31:28 -0800 Mike Pavone FIx movem when src is reg list and dst is not a areg predec mode
Sat, 05 Jan 2013 00:53:50 -0800 Mike Pavone Fix predec address mode when used as source
Fri, 04 Jan 2013 23:52:20 -0800 Mike Pavone Fix rotate instructions that use a register source. Fix ROXL/ROXR to actually use the appropriate x86 instruction.
Fri, 04 Jan 2013 23:25:23 -0800 Mike Pavone Add cycles for Bcc (needs work, but this changes keeps some ROMs from making the emulator unresponsive)
Fri, 04 Jan 2013 23:21:07 -0800 Mike Pavone Don't use the native call stack for M68K calls by default
Fri, 04 Jan 2013 22:51:01 -0800 Mike Pavone Small fix for bit instructions
Fri, 04 Jan 2013 21:47:09 -0800 Mike Pavone Implement access to Z80 RAM
Thu, 03 Jan 2013 22:49:21 -0800 Mike Pavone Implement TRAP (untested)
Thu, 03 Jan 2013 22:07:40 -0800 Mike Pavone Implement MULU/MULS and DIVU/DIVS
Tue, 01 Jan 2013 09:40:17 -0800 Mike Pavone Do a sync when interrupt mask changes so we can recompute the next interrupt cycle. Also fix a bug in which the SR part of ORI to SR was not being performed.
Tue, 01 Jan 2013 07:06:57 -0800 Mike Pavone Make writes to control and data port block when DMA is in progress
Tue, 01 Jan 2013 07:04:48 -0800 Mike Pavone Bail out of disassembly of a particular stream when we hit an invalid instruction
Tue, 01 Jan 2013 07:03:52 -0800 Mike Pavone Add hgignore file
Mon, 31 Dec 2012 20:09:09 -0800 Mike Pavone Implement most of the "X" instructions
Mon, 31 Dec 2012 19:17:01 -0800 Mike Pavone Implement m68k_modified_ret_addr
Mon, 31 Dec 2012 18:53:52 -0800 Mike Pavone Comment out some debug printfs
Mon, 31 Dec 2012 18:36:16 -0800 Mike Pavone Fix infinite loop bug in sprite rendering
Mon, 31 Dec 2012 18:22:25 -0800 Mike Pavone Fix DMA fills to VRAM
Mon, 31 Dec 2012 18:12:08 -0800 Mike Pavone Fix DMA in progress flag in VDP status register
Mon, 31 Dec 2012 11:56:01 -0800 Mike Pavone Fix label names in disassembler
Mon, 31 Dec 2012 11:54:27 -0800 Mike Pavone Properly support references to odd addresses in label generation in disassembler. Add labels for start and interrupts.
Mon, 31 Dec 2012 11:26:57 -0800 Mike Pavone Fix VDP reads
Sun, 30 Dec 2012 22:39:41 -0800 Mike Pavone Implemented HV counter
Sun, 30 Dec 2012 18:40:33 -0800 Mike Pavone Fix some bugs in decoding cmp
Sun, 30 Dec 2012 11:54:25 -0800 Mike Pavone Fix 68K->VDP DMA
Sun, 30 Dec 2012 09:55:18 -0800 Mike Pavone Improve disassembler
Sun, 30 Dec 2012 09:55:07 -0800 Mike Pavone Add support for pc indexed addressing mode to lea
Sun, 30 Dec 2012 07:52:44 -0800 Mike Pavone Support more address modes for jmp
Sun, 30 Dec 2012 01:15:16 -0800 Mike Pavone Fix bug that was causing DMA fills to lock up under certain circumstances
Sun, 30 Dec 2012 00:11:03 -0800 Mike Pavone Make version register return correct value for USA
Sat, 29 Dec 2012 23:40:30 -0800 Mike Pavone Fix swap
Sat, 29 Dec 2012 23:08:14 -0800 Mike Pavone Cleanup bit instructions and fix bug in translate_m68k_move that caused incorrect results once translate_m68k_src was fixed
Sat, 29 Dec 2012 23:07:23 -0800 Mike Pavone Fix crash when printing error message about modified return address
Sat, 29 Dec 2012 22:22:53 -0800 Mike Pavone Fix check in translate_m68k_src that deals with instructions for which both operands are registers that are not mapped to a native x86-64 register
Sat, 29 Dec 2012 22:11:28 -0800 Mike Pavone Fix encoding of movsx instruction when used with new (i.e. r9-r15) registers. This fixes the indexed addressing modes when used with a word-wide index register
Sat, 29 Dec 2012 21:55:42 -0800 Mike Pavone Some fixes for translating code in located in RAM
Sat, 29 Dec 2012 21:10:07 -0800 Mike Pavone Implement the rest of the bit instructions
Sat, 29 Dec 2012 20:33:39 -0800 Mike Pavone Implemented ROL and ROR
Sat, 29 Dec 2012 12:52:19 -0800 Mike Pavone Fix logic for switching between USP and SSP
Fri, 28 Dec 2012 22:47:22 -0800 Mike Pavone Fix decoding of CMPA
Fri, 28 Dec 2012 22:47:10 -0800 Mike Pavone Fix return address pushed to stack for jsr
Fri, 28 Dec 2012 21:36:22 -0800 Mike Pavone cycles should return dst
Fri, 28 Dec 2012 21:25:00 -0800 Mike Pavone Fix call_r in gen_x86 so that it properly returns a pointer to the location after the generated instruction
Fri, 28 Dec 2012 21:20:14 -0800 Mike Pavone Implement pea (untested).
Fri, 28 Dec 2012 20:46:29 -0800 Mike Pavone Fix Z80 busreq logic
Fri, 28 Dec 2012 19:21:05 -0800 Mike Pavone Allow jmp/jsr to follow pc-relative addresses in disassembler
Fri, 28 Dec 2012 17:59:41 -0800 Mike Pavone Defer the correct address for pc relative jsr/jmp
Fri, 28 Dec 2012 17:57:43 -0800 Mike Pavone Implement scc (untested)
Fri, 28 Dec 2012 15:34:24 -0800 Mike Pavone Fix decoding of Scc
Fri, 28 Dec 2012 15:16:36 -0800 Mike Pavone Implement more address modes for jsr
Fri, 28 Dec 2012 15:04:22 -0800 Mike Pavone COmment out fifo full debug printf
Fri, 28 Dec 2012 15:03:00 -0800 Mike Pavone Fix horizontal mask values for scroll plane map address calculation
Fri, 28 Dec 2012 14:30:25 -0800 Mike Pavone Fix areg indexed mode for move dst
Fri, 28 Dec 2012 11:07:13 -0800 Mike Pavone Implement ORI to CCR/SR
Fri, 28 Dec 2012 10:37:09 -0800 Mike Pavone Implemented move from SR
Thu, 27 Dec 2012 23:00:11 -0800 Mike Pavone Use unsigned comparisons for address decoding, exit when we hit an unhandled addressing mode for jmp
Thu, 27 Dec 2012 22:48:54 -0800 Mike Pavone Don't pre-emptively translate code at interrupt vectors as some PD ROMs have these pointing at junk. Need some kind of heuristic for detecting garbage if I'm going to translate them ahead of time by default.
Thu, 27 Dec 2012 22:41:28 -0800 Mike Pavone allocate a new native code chunk when we run out of space
Thu, 27 Dec 2012 22:35:26 -0800 Mike Pavone Some fixes to add/addx sub/subx decoding
Thu, 27 Dec 2012 22:11:26 -0800 Mike Pavone Implement areg indexed mode for lea
Thu, 27 Dec 2012 22:05:22 -0800 Mike Pavone Allow use of indexed modes as move dst
Thu, 27 Dec 2012 21:54:54 -0800 Mike Pavone Allow indexed modes to be used as a destination
Thu, 27 Dec 2012 21:32:00 -0800 Mike Pavone Fix address register indexed addressing (probably)
Thu, 27 Dec 2012 21:23:55 -0800 Mike Pavone Fix pc indexed addressing (probably) when used as a source
Thu, 27 Dec 2012 21:19:58 -0800 Mike Pavone Initial work on allowing dynamic branches and code in RAM plus a small fix to effective address decoding
Thu, 27 Dec 2012 18:47:33 -0800 Mike Pavone Fix decoding bug for addq/subq
Thu, 27 Dec 2012 18:21:10 -0800 Mike Pavone Implement EXT, add some fixes to LINK/UNLK
Thu, 27 Dec 2012 10:40:03 -0800 Mike Pavone Fix some bugs in emulation of CLR
Thu, 27 Dec 2012 10:10:23 -0800 Mike Pavone Fix decoding bug in addq/subq
Wed, 26 Dec 2012 22:13:31 -0800 Mike Pavone Fix decoding of and
Wed, 26 Dec 2012 22:07:44 -0800 Mike Pavone Minor joypad fix and commeount out some debug printfs
Wed, 26 Dec 2012 21:50:48 -0800 Mike Pavone Forgot to add blastem main file earlier
Wed, 26 Dec 2012 20:18:58 -0800 Mike Pavone vertical interrupts now work
Wed, 26 Dec 2012 18:20:23 -0800 Mike Pavone RTE doesn't crash the emulator anymore
Wed, 26 Dec 2012 17:50:24 -0800 Mike Pavone Fix Z80 BUSREQ/RESET implementation.
Wed, 26 Dec 2012 17:34:59 -0800 Mike Pavone Fix long reads from IO ports or long reads that trigger sync cycles by saving rdi. Possibly fix word wide IO reads.
Wed, 26 Dec 2012 17:06:34 -0800 Mike Pavone Implement Z80 reset and bus request registers.
Wed, 26 Dec 2012 11:09:04 -0800 Mike Pavone Initial stab at interrupt support. Make native code offsets bigger so I don't have to worry about overflowing the offset. Implement neg and not (untested).
Sat, 22 Dec 2012 21:37:25 -0800 Mike Pavone Add support for indexed modes as a source, some work on jmp and jsr with areg indirect mode
Fri, 21 Dec 2012 22:33:24 -0800 Mike Pavone Fix bug in disassembler that caused it to disassemble addresses it shouldn't
Fri, 21 Dec 2012 22:24:45 -0800 Mike Pavone Implement indexed with 8-bit displacement addressing modes in decoder and disassembler
Fri, 21 Dec 2012 21:53:05 -0800 Mike Pavone Added untested support for LINK and UNLK
Fri, 21 Dec 2012 21:26:16 -0800 Mike Pavone Removed some old debug printfs
Fri, 21 Dec 2012 21:19:03 -0800 Mike Pavone Implement JSR for some addressing modes
Fri, 21 Dec 2012 20:56:32 -0800 Mike Pavone Implement DMA (untested)
Fri, 21 Dec 2012 16:38:40 -0800 Mike Pavone Fix some bugs in movem with a register list destination
Fri, 21 Dec 2012 16:04:41 -0800 Mike Pavone Implement a couple of supervisor instructions
Fri, 21 Dec 2012 16:04:30 -0800 Mike Pavone Implement word wide access to IO area
Fri, 21 Dec 2012 01:00:52 -0800 Mike Pavone Implement more instructions and address modes
Thu, 20 Dec 2012 09:17:31 -0800 Mike Pavone Make the translator bail out if it hits an instruction I haven't implemented yet
Thu, 20 Dec 2012 09:12:24 -0800 Mike Pavone Fix disassembly of reg list in MOVEM when the reg list is the destination
Thu, 20 Dec 2012 09:08:13 -0800 Mike Pavone Fix decoding and disassembly of MOVEM
Thu, 20 Dec 2012 00:56:33 -0800 Mike Pavone Fix BTST
Thu, 20 Dec 2012 00:44:59 -0800 Mike Pavone Gamepad support
Wed, 19 Dec 2012 22:15:16 -0800 Mike Pavone Fix issue in which VDP would have trouble emptying FIFO because the VDP cycle count got reset at end of frame.
Wed, 19 Dec 2012 21:25:39 -0800 Mike Pavone Cleanup 68K timing code. Temporarily omment out fFPS counter as it was causing segfaults
Wed, 19 Dec 2012 20:53:59 -0800 Mike Pavone Add FPS counter to console output
Wed, 19 Dec 2012 20:53:45 -0800 Mike Pavone Print out large immediate values in hex rather than decimal form
Wed, 19 Dec 2012 20:23:59 -0800 Mike Pavone Add support for BTST instruction (untested), absolute addressing mode for instructions other than move (untested) and fix decoding of MOVEM.
Tue, 18 Dec 2012 23:55:10 -0800 Mike Pavone Fix operand order for AND instructions
Tue, 18 Dec 2012 22:56:04 -0800 Mike Pavone ecx was getting clobbered before the relevant temp value was used in some cases during memory reads
Tue, 18 Dec 2012 22:20:25 -0800 Mike Pavone Properly zero-init all VDP buffers. Comment out some debug printfs.
Tue, 18 Dec 2012 22:19:52 -0800 Mike Pavone Code in runtime for checking for VDP reads was using the wrong register. This is now fixed.
Tue, 18 Dec 2012 19:51:33 -0800 Mike Pavone Fix CRAM and possibly VSRAM writes
Tue, 18 Dec 2012 19:51:17 -0800 Mike Pavone Add palette debug to SDL renderer
Tue, 18 Dec 2012 02:16:42 -0800 Mike Pavone Get Flavio's color bar demo kind of sort of working
Sun, 16 Dec 2012 22:25:29 -0800 Mike Pavone Add preliminary support for JMP
Sun, 16 Dec 2012 21:57:52 -0800 Mike Pavone Implement CLR, minor refactor of register offset calculation in context struct
Sat, 15 Dec 2012 23:01:32 -0800 Mike Pavone Implement shift instructions (asl, lsl, asr, lsr). Add flags to register printout. Fix minor bug in shift/rotate instruction decoding.
Thu, 13 Dec 2012 09:47:40 -0800 Mike Pavone Fix shift rotate instruction decoding and improve disassembly of move USP and conditional branch instructions
Wed, 12 Dec 2012 23:21:11 -0800 Mike Pavone Add untested support for and, eor, or, swap, tst and nop instructions. Add call to m68k_save_result for add and sub so that they will properly save results for memory destinations
Wed, 12 Dec 2012 21:25:31 -0800 Mike Pavone Don't try to disassemble addresses beyond the end of the cartridge
Wed, 12 Dec 2012 20:43:42 -0800 Mike Pavone Fix bug in address visitation in disassembler
Wed, 12 Dec 2012 20:18:06 -0800 Mike Pavone Add support for dbcc instruction
Wed, 12 Dec 2012 20:17:59 -0800 Mike Pavone Add vector table to test.s68
Wed, 12 Dec 2012 20:17:11 -0800 Mike Pavone Add logic for following control flow based on logic in the translator
Sun, 09 Dec 2012 18:40:45 -0800 Mike Pavone Add debug render mode and fix vertical flip bit for bg tiles
Sun, 09 Dec 2012 17:26:36 -0800 Mike Pavone Fix bug in tile address masking. Remove some debug code from window plane.
Sun, 09 Dec 2012 17:10:08 -0800 Mike Pavone More correct window support, maybe
Sun, 09 Dec 2012 17:05:13 -0800 Mike Pavone Broken window support
Sun, 09 Dec 2012 01:13:41 -0800 Mike Pavone Horizontal scroll works correctly now. In particular, the SEGA logo in Vectorman has a nice smooth wave like it should
Sun, 09 Dec 2012 00:03:15 -0800 Mike Pavone Implement sprite index >= sprite limit triggers sprite limit behavior
Sat, 08 Dec 2012 23:49:51 -0800 Mike Pavone Initial H32 mode support
Sat, 08 Dec 2012 23:09:40 -0800 Mike Pavone Pass all sprite masking tests
Sat, 08 Dec 2012 23:06:13 -0800 Mike Pavone Small fix to overflow flag
Sat, 08 Dec 2012 22:50:14 -0800 Mike Pavone Improve sprite masking to almost completely pass Nemesis' sprite masking test
Sat, 08 Dec 2012 22:07:25 -0800 Mike Pavone Add support for simple resolution scaling
Sat, 08 Dec 2012 21:39:01 -0800 Mike Pavone Fix horizontal sprite mirroring
Sat, 08 Dec 2012 20:25:56 -0800 Mike Pavone Make horizontal scrolling closer to correct, Comix Zone looks good, Sonic 2 slightly off
Sat, 08 Dec 2012 20:02:10 -0800 Mike Pavone Small cleanup
Sat, 08 Dec 2012 19:59:32 -0800 Mike Pavone Fix horizontal scroll offset
Sat, 08 Dec 2012 19:42:07 -0800 Mike Pavone Fix BG plane B render bug
Sat, 08 Dec 2012 16:58:11 -0800 Mike Pavone Fix sprite transparency for overlapping sprites
Sat, 08 Dec 2012 16:46:47 -0800 Mike Pavone Fix management of context->sprite_draws so the sprite layer only draws when it should
Sat, 08 Dec 2012 16:16:18 -0800 Mike Pavone Fix vertical scroll value for plane B
Sat, 08 Dec 2012 16:09:43 -0800 Mike Pavone Partially fix BG plane B
Sat, 08 Dec 2012 16:02:17 -0800 Mike Pavone Fix endianness of VSRAM when read from Genecyst save state
Sat, 08 Dec 2012 11:59:50 -0800 Mike Pavone Sprites fixed, working on bg planes
Sat, 08 Dec 2012 11:12:17 -0800 Mike Pavone Sprites somewhat less broken
Sat, 08 Dec 2012 02:00:54 -0800 Mike Pavone Mostly broken VDP core and savestate viewer
Tue, 04 Dec 2012 19:25:54 -0800 Mike Pavone Initial support for M68k reset vector, rather than starting at an arbitrary address
Tue, 04 Dec 2012 19:13:12 -0800 Mike Pavone M68K to x86 translation works for a limited subset of instructions and addressing modes
Tue, 27 Nov 2012 22:54:38 -0800 Mike Pavone Add asssembly runtime code stub
Tue, 27 Nov 2012 22:50:09 -0800 Mike Pavone Add Makefile
Tue, 27 Nov 2012 22:43:32 -0800 Mike Pavone Make x86 generator generic with respect to operand size for immediate parameters.
Tue, 27 Nov 2012 09:28:13 -0800 Mike Pavone x86 code gen, initial work on translator
Thu, 15 Nov 2012 22:15:43 -0800 Mike Pavone Improve disassembly. FIx some decoding bugs.
Thu, 15 Nov 2012 00:52:53 -0800 Mike Pavone Add mising bit instructions to decoder. Add test assembly file containing most distinct instructions.
Wed, 14 Nov 2012 23:04:55 -0800 Mike Pavone Implement OR_DIV_SBCD group in decoder
Wed, 14 Nov 2012 09:24:40 -0800 Mike Pavone Added new OPSIZE for unsized instructions so they can be properly disassembled without making them special cases
Tue, 13 Nov 2012 18:26:43 -0800 Mike Pavone Implement (possibly broken) decoding of all M68000 instructions not in the OR_DIV_SBCD group
Fri, 09 Nov 2012 22:01:26 -0800 Mike Pavone Finish bit/movep/immediate group except for 68020 instructions
Tue, 06 Nov 2012 02:07:45 -0800 Mike Pavone merge
Tue, 06 Nov 2012 01:57:36 -0800 Mike Pavone Add some logic analyzer captures, a Python script for analyzing said captures and a higher level analysis of the output
Tue, 06 Nov 2012 02:04:42 -0800 Mike Pavone More bit and immediate instructions
Sun, 04 Nov 2012 23:43:03 -0800 Mike Pavone Add support for some bit instructions and a few others in the same "category"
Sat, 03 Nov 2012 22:15:55 -0700 Mike Pavone Finish mulu.w, muls.w and abcd parameter decoding
Sat, 03 Nov 2012 21:38:28 -0700 Mike Pavone Improve 68K instruction decoding. Add simple disassembler.
Sat, 03 Nov 2012 21:37:38 -0700 Mike Pavone Make sure all operations are long-word length on fib example.
Mon, 29 Oct 2012 01:18:38 -0700 Mike Pavone Initial work on M68K instruction decoding