| Thu, 01 Jan 2015 20:07:47 -0800 |
Michael Pavone |
Use call_args and call_args_abi in Z80 core
|
| Thu, 01 Jan 2015 14:36:55 -0800 |
Michael Pavone |
Remove some of the hard coded assumptions about the memory map from the CPU cores
|
| Tue, 30 Dec 2014 19:11:34 -0800 |
Michael Pavone |
Merge
|
| Tue, 16 Dec 2014 01:10:54 -0800 |
Michael Pavone |
Fix flags for rra, rrca, rla and rlca. Fix timing for rr, rrc, rl and rlc when using IX or IY. Fix access to I and R registers (R still needs to be made 7-bit though). Fix flags for ld a, i. The fix for access to I fixes PCM playback in Titan Overdrive and music playback in Crackdown.
|
| Wed, 03 Dec 2014 09:30:01 -0800 |
Michael Pavone |
Temporarily comment out code to translate Z80 instructions in place as in rare cases it can stomp the next instruction if a branch goes from a short from to a long one
|
| Sat, 21 Jun 2014 09:36:15 -0700 |
Michael Pavone |
Fix Z80 interrupts
|
| Fri, 20 Jun 2014 07:57:32 -0700 |
Michael Pavone |
Added some preliminary support for interpreting Z80 code from non-RAM addresses
|
| Thu, 19 Jun 2014 19:50:16 -0700 |
Michael Pavone |
Properly handle Z80 breakpoints on self-modifying code and setting Z80 breakpoints before the Z80 program has been loaded
|
| Thu, 19 Jun 2014 08:14:35 -0700 |
Michael Pavone |
Slight cleanup of vint handling on the Z80
|
| Mon, 29 Dec 2014 23:08:39 -0800 |
Michael Pavone |
Fix handling of code writes for Z80 core. This seems to get things close to being back to where they were before the big refactor that broke the Z80 core. Some problems remain. Notably the sound driver in Sonic 2 is still quite broken.
|
| Fri, 26 Dec 2014 15:45:31 -0800 |
Michael Pavone |
Fix a few bugs introduced in the Z80 core from the adjustments to fit with the code gen refactor
|
| Fri, 26 Dec 2014 12:56:53 -0800 |
Michael Pavone |
Fix an off-by-one error in a branch destination in the generation of handle_cycle_limit for the Z80
|
| Fri, 26 Dec 2014 12:52:13 -0800 |
Michael Pavone |
Update code->cur before calling z80_get_address_trans in z80_retranslate_inst to avoid any newly translated instructions from being placed in the "buffer zone". Save the current value of the code_info struct for placing the final jmp instruction in the correct place
|
| Fri, 26 Dec 2014 12:34:41 -0800 |
Michael Pavone |
Add in missing generated Z80 helper functions. Fix a small bug in Z80_HALT. Fix generation of save and load context for Z80
|
| Mon, 22 Dec 2014 20:55:10 -0800 |
Michael Pavone |
Z80 core is sort of working again
|
| Wed, 17 Dec 2014 23:03:19 -0800 |
Michael Pavone |
Get rest of emulator compiling again with Z80 core enabled
|
| Wed, 17 Dec 2014 09:53:51 -0800 |
Michael Pavone |
Get Z80 core back into compileable state
|
| Sun, 14 Dec 2014 16:45:23 -0800 |
Michael Pavone |
WIP effort to update z80 core for code gen changes
|
| Tue, 17 Jun 2014 01:50:29 -0400 |
Mike Pavone |
blastem builds and almost works on OS X now
|
| Mon, 27 Jan 2014 22:12:22 -0800 |
Michael Pavone |
Fix timing of certain ld and jp instructions in the Z80 core
|
| Mon, 06 Jan 2014 22:54:05 -0800 |
Michael Pavone |
The local clone on my laptop got messed up and some changes had not been pushed. This commit represents the status of the working copy from that clone. It unfortunately contains some changes that I did not intend to commit yet, but this seems like the best option at the moment.
|
| Tue, 10 Sep 2013 23:31:08 -0700 |
Mike Pavone |
Added copyright notice to source files and added GPL license text in COPYING
|
| Sat, 29 Jun 2013 17:15:08 -0700 |
Mike Pavone |
Add support for loading GST format savestates
|
| Mon, 24 Jun 2013 21:32:25 -0700 |
Mike Pavone |
Fix access to int_enable_cycle in EI
|
| Sat, 15 Jun 2013 23:10:48 -0700 |
Mike Pavone |
Fix DI
|
| Fri, 14 Jun 2013 23:27:01 -0700 |
Mike Pavone |
Fix adc and sbc
|
| Thu, 13 Jun 2013 22:23:15 -0700 |
Mike Pavone |
Fix LDIR
|
| Tue, 11 Jun 2013 23:09:57 -0700 |
Mike Pavone |
Bail out on attempt to run code from bank area until it is properly supported
|
| Sat, 08 Jun 2013 11:31:52 -0700 |
Mike Pavone |
Use a call instruction to figure out the original native address when retranslating so that it does not get lost when the byte transforms from a instruction word to extension word
|
| Thu, 06 Jun 2013 08:45:54 -0700 |
Mike Pavone |
Removed out of date TODO
|
| Thu, 06 Jun 2013 08:19:25 -0700 |
Mike Pavone |
Fix LDD and LDDR
|
| Wed, 05 Jun 2013 22:55:23 -0700 |
Mike Pavone |
Fix dec and inc when the operand is in memory
|
| Wed, 05 Jun 2013 18:47:39 -0700 |
Mike Pavone |
Fix LDI
|
| Tue, 04 Jun 2013 22:30:49 -0700 |
Mike Pavone |
Fix set/res when the operand is in memory
|
| Sun, 02 Jun 2013 21:12:26 -0700 |
Mike Pavone |
Fix cycle count for inc and dec
|
| Sun, 02 Jun 2013 20:14:27 -0700 |
Mike Pavone |
Bunch of Z80 debugger improvements
|
| Fri, 31 May 2013 20:46:56 -0700 |
Mike Pavone |
Fix P condition in Z80 core
|
| Fri, 31 May 2013 19:43:13 -0700 |
Mike Pavone |
Partial implementation of Z80 debugger
|
| Wed, 29 May 2013 00:13:48 -0700 |
Mike Pavone |
Fix push AF
|
| Mon, 27 May 2013 20:37:55 -0700 |
Mike Pavone |
Fix sizeof expression passed to malloc in z80_init to avoid a minor memory error
|
| Tue, 14 May 2013 21:59:56 -0700 |
Mike Pavone |
Some Z80 interrupt fixes
|
| Thu, 09 May 2013 20:09:49 -0700 |
Mike Pavone |
Fix return address for RST
|
| Thu, 09 May 2013 19:38:28 -0700 |
Mike Pavone |
Show absolute addresses for JR, JRCC and DJNZ in Z80 disassembler
|
| Thu, 09 May 2013 19:24:18 -0700 |
Mike Pavone |
Fix terminal instruction detection in disassembler
|
| Thu, 09 May 2013 18:36:21 -0700 |
Mike Pavone |
Properly handle instructions that use boty IYH and IYL
|
| Thu, 09 May 2013 00:33:06 -0700 |
Mike Pavone |
Set the N flag to the correct value for DEC instructions
|
| Thu, 09 May 2013 00:30:55 -0700 |
Mike Pavone |
Implement carry flag for shift instructions. Implement weird behavior for bit 0 of SLL. Fix missing break statement in SRL.
|
| Thu, 09 May 2013 00:17:12 -0700 |
Mike Pavone |
Correctly set the N flag for SBC
|
| Thu, 09 May 2013 00:14:54 -0700 |
Mike Pavone |
Deal with the fact that there's no 8-bit version of the BT family of instructions on x86
|
| Wed, 08 May 2013 23:44:49 -0700 |
Mike Pavone |
Complete flag behavior for Z80 BIT instruction
|
| Wed, 08 May 2013 23:31:19 -0700 |
Mike Pavone |
Properly handle negative displacements in Z80 core
|
| Wed, 08 May 2013 23:29:21 -0700 |
Mike Pavone |
Contrary to the official documenation, OR and AND also set PV based on parity instead of overflow
|
| Wed, 08 May 2013 23:20:41 -0700 |
Mike Pavone |
Set PV flag based on parity, not overflow for XOR
|
| Wed, 08 May 2013 23:17:54 -0700 |
Mike Pavone |
BIT was setting the zero flag to the opposite of what it should have. This is now fixed.
|
| Wed, 08 May 2013 23:12:08 -0700 |
Mike Pavone |
More fixes for confusion between Z80_UNUSED and MODE_UNUSED
|
| Wed, 08 May 2013 23:03:18 -0700 |
Mike Pavone |
Compare src_op.mode with the correct constant in shift/rotate instructions
|
| Wed, 08 May 2013 22:49:50 -0700 |
Mike Pavone |
Fix IX/IY register selection when the direction bit is set
|
| Wed, 08 May 2013 22:46:03 -0700 |
Mike Pavone |
Fix calcuation of IX/IY dipslacements. Fix a bunch of stuff related to the IX/IY bit/shift/rotate instructions.
|
| Wed, 08 May 2013 17:39:13 -0700 |
Mike Pavone |
Fix stupid copy-pasta bug in XOR
|
| Wed, 08 May 2013 17:32:28 -0700 |
Mike Pavone |
Fix byte order of pop AF
|
