Mercurial > repos > blastem

changeset 359:cc39629e8d06

Find changesets by keywords (author, files, the commit message), revision number or hash, or revset expression.
YM2612 WIP snapshot before register refactor
author Mike Pavone <pavone@retrodev.com>
date Mon, 27 May 2013 09:54:58 -0700
parents 9498cfa7f7c8
children c42fae88d346
files Makefile ym2612.c ym2612.h
diffstat 3 files changed, 164 insertions(+), 32 deletions(-) [+]
line wrap: on
line diff
--- a/Makefile	Fri May 24 00:41:54 2013 -0700
+++ b/Makefile	Mon May 27 09:54:58 2013 -0700
@@ -8,7 +8,7 @@
 all : dis trans stateview blastem
 
 blastem : blastem.o 68kinst.o gen_x86.o m68k_to_x86.o z80inst.o z80_to_x86.o x86_backend.o runtime.o zruntime.o mem.o vdp.o ym2612.o psg.o render_sdl.o
-	$(CC) -o blastem blastem.o 68kinst.o gen_x86.o m68k_to_x86.o z80inst.o z80_to_x86.o x86_backend.o runtime.o zruntime.o mem.o vdp.o ym2612.o psg.o render_sdl.o `pkg-config --libs $(LIBS)`
+	$(CC) -ggdb -o blastem blastem.o 68kinst.o gen_x86.o m68k_to_x86.o z80inst.o z80_to_x86.o x86_backend.o runtime.o zruntime.o mem.o vdp.o ym2612.o psg.o render_sdl.o `pkg-config --libs $(LIBS)`
 
 dis : dis.o 68kinst.o
 	$(CC) -o dis dis.o 68kinst.o
--- a/ym2612.c	Fri May 24 00:41:54 2013 -0700
+++ b/ym2612.c	Mon May 27 09:54:58 2013 -0700
@@ -1,13 +1,27 @@
 #include <string.h>
+#include <math.h>
+#include <stdio.h>
 #include "ym2612.h"
 
 #define BUSY_CYCLES 17
 #define TIMERA_UPDATE_PERIOD 144
 
-#define REG_TIMERA_HIGH 0x3 // 0x24
-#define REG_TIMERA_LOW 0x4  // 0x25
-#define REG_TIMERB 0x5      // 0x26
-#define REG_TIME_CTRL 0x6   // 0x27
+#define REG_TIMERA_HIGH 0x03 // 0x24
+#define REG_TIMERA_LOW  0x04 // 0x25
+#define REG_TIMERB      0x05 // 0x26
+#define REG_TIME_CTRL   0x06 // 0x27
+#define REG_DAC         0x0A // 0x2A
+#define REG_DAC_ENABLE  0x0B // 0x2B
+
+//offset to add to "shared" regs when looking for them in Part I
+#define REG_SHARED      0x10
+
+
+#define REG_ALG_FEEDBACK (0xB0-0x30)
+#define REG_ATTACK_KS    (0x50-0x30)
+#define REG_DECAY_AM     (0x60-0x30)
+#define REG_SUSTAIN_RATE (0x70-0x30)
+
 
 #define BIT_TIMERA_ENABLE 0x1
 #define BIT_TIMERB_ENABLE 0x2
@@ -19,45 +33,155 @@
 #define BIT_STATUS_TIMERA 0x1
 #define BIT_STATUS_TIMERB 0x2
 
+enum {
+	PHASE_ATTACK,
+	PHASE_DECAY,
+	PHASE_SUSTAIN,
+	PHASE_RELEASE
+};
+
+uint8_t did_tbl_init = 0;
+//According to Nemesis, real hardware only uses a 256 entry quarter sine table; however,
+//memory is cheap so using a half sine table will probably save some cycles
+//a full sine table would be nice, but negative numbers don't get along with log2
+#define SINE_TABLE_SIZE 512
+uint16_t sine_table[SINE_TABLE_SIZE];
+//Similar deal here with the power table for log -> linear conversion
+//According to Nemesis, real hardware only uses a 256 entry table for the fractional part
+//and uses the whole part as a shift amount.
+#define POW_TABLE_SIZE (1 << 13)
+uint16_t pow_table[POW_TABLE_SIZE];
+
+
+uint16_t round_fixed_point(double value, int dec_bits)
+{
+	return value * (1 << dec_bits) + 0.5;
+}
+
 void ym_init(ym2612_context * context)
 {
 	memset(context, 0, sizeof(*context));
+	if (!did_tbl_init) {
+		//populate sine table
+		for (int32_t i = 0; i < 512; i++) {
+			double sine = sin( ((double)(i*2+1) / SINE_TABLE_SIZE) * M_PI_2 );
+			
+			//table stores 4.8 fixed pointed representation of the base 2 log
+			sine_table[i] = round_fixed_point(-log2(sine), 8);
+		}
+		//populate power table
+		for (int32_t i = 0; i < POW_TABLE_SIZE; i++) {
+			double linear = pow(2, -((double)((i & 0xFF)+1) / 256.0));
+			int32_t tmp = round_fixed_point(linear, 11);
+			int32_t shift = (i >> 8) - 2;
+			if (shift < 0) {
+				tmp <<= 0-shift;
+			} else {
+				tmp >>= shift;
+			}
+			pow_table[i] =  tmp;
+		}
+	}
 }
 
 void ym_run(ym2612_context * context, uint32_t to_cycle)
 {
-	uint32_t delta = to_cycle - context->current_cycle;
-	//Timers won't be perfect with this, but it's good enough for now
-	//once actual FM emulation is in place the timers should just be 
-	//decremented/reloaded on the appropriate ticks
-	uint32_t timer_delta = to_cycle / TIMERA_UPDATE_PERIOD;
-	if (context->part1_regs[REG_TIME_CTRL] & BIT_TIMERA_ENABLE) {
-		if (timer_delta > context->timer_a) {
-			if (context->part1_regs[REG_TIME_CTRL] & BIT_TIMERA_OVEREN) {
-				context->status |= BIT_STATUS_TIMERA;
+	for (; context->current_cycle < to_cycle; context->current_cycle += 6) {
+		uint32_t update_cyc = context->current_cycle % 144;
+		//Update timers at beginning of 144 cycle period
+		if (!update_cyc && context->part1_regs[REG_TIME_CTRL] & BIT_TIMERA_ENABLE) {
+			if (context->timer_a) {
+				context->timer_a--;
+			} else {
+				if (context->part1_regs[REG_TIME_CTRL] & BIT_TIMERA_OVEREN) {
+					context->status |= BIT_STATUS_TIMERA;
+				}
+				context->timer_a = (context->part1_regs[REG_TIMERA_HIGH] << 2) | (context->part1_regs[REG_TIMERA_LOW] & 0x3);
 			}
-			uint32_t rem_delta = timer_delta - (context->timer_a+1);
-			uint16_t timer_val = (context->part1_regs[REG_TIMERA_HIGH] << 2) | (context->part1_regs[REG_TIMERA_LOW] & 0x3);
-			context->timer_a = timer_val - (rem_delta % (timer_val + 1));
-		} else {
-			context->timer_a -= timer_delta;
+			if (context->part1_regs[REG_TIME_CTRL] & BIT_TIMERB_ENABLE) {
+				uint32_t b_cyc = (context->current_cycle / 144) % 16;
+				if (!b_cyc) {
+					if (context->timer_b) {
+						context->timer_b--;
+					} else {
+						if (context->part1_regs[REG_TIME_CTRL] & BIT_TIMERB_OVEREN) {
+							context->status |= BIT_STATUS_TIMERB;
+						}
+						context->timer_b = context->part1_regs[REG_TIMERB];
+					}
+				}
+			}
 		}
-	}
-	timer_delta /= 16; //Timer B runs at 1/16th the speed of Timer A
-	if (context->part1_regs[REG_TIME_CTRL] & BIT_TIMERB_ENABLE) {
-		if (timer_delta > context->timer_b) {
-			if (context->part1_regs[REG_TIME_CTRL] & BIT_TIMERB_OVEREN) {
-				context->status |= BIT_STATUS_TIMERB;
+		//Update Envelope Generator
+		if (update_cyc == 0 || update_cyc == 72) {
+			uint32_t env_cyc = context->current_cycle / 72;
+			uint32_t op = env_cyc % 24;
+			env_cyc /= 24;
+			uint8_t rate;
+			switch(context->env_phase[op])
+			{
+			case PHASE_ATTACK:
+				rate = (op < 3 ? context->part1_regs[REG_SHARED + REG_ATTACK_KS + op] : context->part2_regs[REG_ATTACK_KS + op - 3]) & 0x1F;
+				break;
+			case PHASE_DECAY:
+				rate = (op < 3 ? context->part1_regs[REG_SHARED + REG_DECAY_AM + op] : context->part2_regs[REG_DECAY_AM + op - 3]) & 0x1F;
+				break;
+			case PHASE_SUSTAIN:
+				rate = (op < 3 ? context->part1_regs[REG_SHARED + REG_SUSTAIN_RATE + op] : context->part2_regs[REG_SUSTAIN_RATE + op - 3]) & 0x1F;
+				break;
+			case PHASE_RELEASE:
+				rate = (op < 3 ? context->part1_regs[REG_SHARED + REG_DECAY_AM + op] : context->part2_regs[REG_DECAY_AM + op - 3]) << 1 & 0x1E | 1;
+				break;
+			}
+			if (rate) {
+				//apply key scaling
+				uint8_t shift = (op < 3 ? 
+					context->part1_regs[REG_SHARED + REG_ATTACK_KS + op] : 
+					context->part2_regs[REG_ATTACK_KS + op - 3]
+				) >> 6;
+				uint8_t ks = context->keycode[op] >> (3 - shift);
+				rate = rate*2 + ks;
+				if (rate > 63) {
+					rate = 63;
+				}
 			}
-			uint32_t rem_delta = timer_delta - (context->timer_b+1);
-			uint8_t timer_val = context->part1_regs[REG_TIMERB];
-			context->timer_b = timer_val - (rem_delta % (timer_val + 1));
-		} else {
-			context->timer_a -= timer_delta;
 		}
+		//Update Phase Generator
+		uint32_t channel = update_cyc / 24;
+		if (channel != 6 || !(context->part1_regs[REG_DAC_ENABLE] & 0x80)) {
+			uint32_t op = (update_cyc) / 6;
+			uint8_t alg;
+			if (op < 3) {
+				alg = context->part1_regs[REG_SHARED + REG_ALG_FEEDBACK + op] & 0x7;
+			} else {
+				alg = context->part2_regs[REG_ALG_FEEDBACK + op-3] & 0x7;
+			}
+			context->phase_counter[op] += context->phase_inc[op];
+			uint16_t phase = context->phase_counter[op] >> 10 & 0x3FF;
+			//TODO: Modulate phase if necessary
+			uint16_t output = pow_table[sine_table[phase & 0x1FF] + context->envelope[op]];
+			if (phase & 0x200) {
+				output = -output;
+			}
+			context->op_out[op] = output;
+			//Update the channel output if we've updated all operators
+			if (op % 4 == 3) {
+				if (alg < 4) {
+					context->channel_out[channel] = context->op_out[channel * 4 + 3];
+				} else if(alg == 4) {
+					context->channel_out[channel] = context->op_out[channel * 4 + 3] + context->op_out[channel * 4 + 1];
+				} else {
+					output = 0;
+					for (uint32_t op = ((alg == 7) ? 0 : 1) + channel*4; op < (channel+1)*4; op++) {
+						output += context->op_out[op];
+					}
+					context->channel_out[channel] = output;
+				}
+			}
+		}
+		
 	}
-	context->current_cycle = to_cycle;
-	if (to_cycle >= context->write_cycle + BUSY_CYCLES) {
+	if (context->current_cycle >= context->write_cycle + BUSY_CYCLES) {
 		context->status &= 0x7F;
 	}
 }
--- a/ym2612.h	Fri May 24 00:41:54 2013 -0700
+++ b/ym2612.h	Mon May 27 09:54:58 2013 -0700
@@ -5,12 +5,20 @@
 
 #define NUM_SHARED_REGS (0x30-0x21)
 #define NUM_PART_REGS (0xB7-0x30)
+#define NUM_OPERATORS (4*6)
 
 typedef struct {
 	uint32_t current_cycle;
 	uint32_t write_cycle;
 	uint8_t  *selected_reg;
+	uint32_t phase_inc[NUM_OPERATORS];
+	uint32_t phase_counter[NUM_OPERATORS];
+	uint16_t envelope[NUM_OPERATORS];
+	uint16_t op_out[NUM_OPERATORS];
+	uint16_t channel_out[6];
 	uint16_t timer_a;
+	uint8_t  env_phase[NUM_OPERATORS];
+	uint8_t  keycode[NUM_OPERATORS];
 	uint8_t  timer_b;
 	uint8_t  reg_num;
 	uint8_t  status;