log

age author description
Sat, 22 Jun 2013 21:19:43 -0700 Mike Pavone Initial work on interlace
Wed, 19 Jun 2013 00:40:13 -0700 Mike Pavone Fix movem with pc displacement or pc indexed source
Wed, 19 Jun 2013 00:25:09 -0700 Mike Pavone Initial stab at LFO phase modulation
Wed, 19 Jun 2013 00:24:59 -0700 Mike Pavone Use a slightly more sane PSG volume divider. Stil seems too loud, need to check the real hardware.
Mon, 17 Jun 2013 19:34:47 -0700 Mike Pavone Process events in vgm player so that quitting works
Mon, 17 Jun 2013 00:54:14 -0700 Mike Pavone Add primitive vgm player for testing
Sun, 16 Jun 2013 17:57:57 -0700 Mike Pavone Add support for logging YM2612 channels to WAVE files
Sun, 16 Jun 2013 13:42:13 -0700 Mike Pavone Fix modulation condition for operator 2
Sun, 16 Jun 2013 13:25:45 -0700 Mike Pavone Implement writes from 68K to Z80 bank register and make reads from port c control register return 0 again
Sun, 16 Jun 2013 11:59:45 -0700 Mike Pavone Minor refactor of io_read functions to avoid duplication of logic between byte and word versions
Sun, 16 Jun 2013 00:56:23 -0700 Mike Pavone Fix YM2612 timers
Sat, 15 Jun 2013 23:50:59 -0700 Mike Pavone Assert z80 interrupt longer so that they are not missed when they should not be
Sat, 15 Jun 2013 23:10:48 -0700 Mike Pavone Fix DI
Sat, 15 Jun 2013 23:10:37 -0700 Mike Pavone Have test generator test both flag register 0 case and flag register FF case
Fri, 14 Jun 2013 23:27:01 -0700 Mike Pavone Fix adc and sbc
Fri, 14 Jun 2013 00:25:04 -0700 Mike Pavone Make keybindings data driven so they can be populated from a config file later
Thu, 13 Jun 2013 22:23:15 -0700 Mike Pavone Fix LDIR
Tue, 11 Jun 2013 23:36:18 -0700 Mike Pavone Fix output of algorithm 4 and make some other minor YM2612 core improvements
Tue, 11 Jun 2013 23:10:33 -0700 Mike Pavone Add debugger command for saving Z80 RAM to a file
Tue, 11 Jun 2013 23:09:57 -0700 Mike Pavone Bail out on attempt to run code from bank area until it is properly supported
Sun, 09 Jun 2013 02:38:56 -0700 Mike Pavone Fix address adjustement in z80_retrans_stub
Sun, 09 Jun 2013 02:03:26 -0700 Mike Pavone Z80 debugger improvements
Sat, 08 Jun 2013 12:59:23 -0700 Mike Pavone Check memory results in ztestgen
Sat, 08 Jun 2013 11:31:52 -0700 Mike Pavone Use a call instruction to figure out the original native address when retranslating so that it does not get lost when the byte transforms from a instruction word to extension word
Thu, 06 Jun 2013 08:45:54 -0700 Mike Pavone Removed out of date TODO
Thu, 06 Jun 2013 08:19:25 -0700 Mike Pavone Fix LDD and LDDR
Wed, 05 Jun 2013 22:55:23 -0700 Mike Pavone Fix dec and inc when the operand is in memory
Wed, 05 Jun 2013 19:26:02 -0700 Mike Pavone Fix channel mapping in key on/off register
Wed, 05 Jun 2013 18:47:39 -0700 Mike Pavone Fix LDI
Tue, 04 Jun 2013 22:30:49 -0700 Mike Pavone Fix set/res when the operand is in memory
Tue, 04 Jun 2013 21:23:12 -0700 Mike Pavone Initial implementation of channel 3 special mode
Tue, 04 Jun 2013 09:16:41 -0700 Mike Pavone Fix operator precedence bug with sustain level
Mon, 03 Jun 2013 23:44:11 -0700 Mike Pavone Fix modulation shift value
Mon, 03 Jun 2013 21:43:38 -0700 Mike Pavone Make the PSG and YM2612 use the master clock internal with an increment based on clock divider so that they stay perflectly in sync. Run both the PSG and YM2612 whenver one of them needs to be run.
Sun, 02 Jun 2013 22:37:48 -0700 Mike Pavone Make shift value of operator output to modulation input a define
Sun, 02 Jun 2013 22:33:27 -0700 Mike Pavone Adjust shift for feedback
Sun, 02 Jun 2013 22:30:41 -0700 Mike Pavone Initial stab at feedback
Sun, 02 Jun 2013 21:52:42 -0700 Mike Pavone Fix key scaling
Sun, 02 Jun 2013 21:38:18 -0700 Mike Pavone Clear IFF1 and IFF2 when an interrupt is taken on the Z80
Sun, 02 Jun 2013 21:12:43 -0700 Mike Pavone Fix YM2612 busy flag
Sun, 02 Jun 2013 21:12:26 -0700 Mike Pavone Fix cycle count for inc and dec
Sun, 02 Jun 2013 20:14:27 -0700 Mike Pavone Bunch of Z80 debugger improvements
Sun, 02 Jun 2013 13:42:33 -0700 Mike Pavone Use signed ints for things that represent signed values in YM2612 core
Sun, 02 Jun 2013 00:00:22 -0700 Mike Pavone Fix register to operator mapping. Fix rate table generation. Add TL to envelope value rather than using it as a limit for the attack phase.
Fri, 31 May 2013 21:30:11 -0700 Mike Pavone Fix left/right enable default value
Fri, 31 May 2013 20:47:34 -0700 Mike Pavone Make the n command in the Z80 debugger actually run the next instruction without needing a c command
Fri, 31 May 2013 20:46:56 -0700 Mike Pavone Fix P condition in Z80 core
Fri, 31 May 2013 19:43:13 -0700 Mike Pavone Partial implementation of Z80 debugger
Wed, 29 May 2013 21:21:14 -0700 Mike Pavone Actually save the shifted phase inc after applying the block shift
Wed, 29 May 2013 00:57:19 -0700 Mike Pavone Incredibly broken YM2612 support plus a fix to Z80 bus request
Wed, 29 May 2013 00:13:48 -0700 Mike Pavone Fix push AF
Mon, 27 May 2013 22:19:11 -0700 Mike Pavone YM2612 WIP update
Mon, 27 May 2013 20:56:02 -0700 Mike Pavone Fix deadlock on quit
Mon, 27 May 2013 20:37:55 -0700 Mike Pavone Fix sizeof expression passed to malloc in z80_init to avoid a minor memory error
Mon, 27 May 2013 09:54:58 -0700 Mike Pavone YM2612 WIP snapshot before register refactor
Fri, 24 May 2013 00:41:54 -0700 Mike Pavone Make Z80 writes to VDP/PSG not potentially crash the emulator
Fri, 24 May 2013 00:26:27 -0700 Mike Pavone Allow VDP/PSG writes from Z80
Thu, 23 May 2013 23:55:42 -0700 Mike Pavone Get rid of debug puts and limit based on audio rather than frame rate by default.
Thu, 23 May 2013 23:51:49 -0700 Mike Pavone Fix clipping in PSG core
Thu, 23 May 2013 23:42:42 -0700 Mike Pavone Initial PSG support. Mostly works, noise channel is borked though.